The vortex Vacuum pump is widely used in the machinery industry. Its impeller consists of dozens of blades, and it operates in a cyclical manner during the movement process. In use, it has many advantages, because it is relatively small in size and very light in weight, which brings great convenience to the operator's work. Of course, its good operation is implemented on the basis of correct installation. Therefore, the operator must install it properly before using the vortex pump.
First, before installing the vortex pump, it needs to be placed in a ventilated and messy position to avoid the influence of the surrounding environment on the use of the equipment. At the same time, you need to put it in a stable place, without any inclination.
Secondly, during installation, it is necessary to pay attention to the direction of rotation of the impeller of the vortex pump to the direction of the arrow on the fan. If the direction of installation is wrong, the vortex pump will not operate.
Then, we must consider the working pressure of the vortex pump, can not exceed 8kpa, to avoid the heat generated by the fan is too large to affect the use of the vortex pump.
Finally, pay attention to the mounting position of the bearing. The bearing can be installed in the middle of the pump cover or it can be installed in the pump body. The difference between the two installation methods also allows the operator to use different maintenance methods when maintaining the vortex air pump.
The vortex air pump is widely used. After it is installed in the correct way, it can be operated well in normal use, so that it can provide more help for the work.