At the same time, we hope that we can effectively reduce the energy efficiency of the equipment through the correct operation method, and achieve a requirement of energy saving. The use of the swirl pump is mainly through several aspects to achieve the ultimate goal of energy saving.
How can Swirl vacuum pump Save Energy Effectively
If the change of the relative flow rate of the swirl pump is not obvious, or only needs a slight adjustment, then the energy consumption of these different adjustment modes is not very different. That is to say, at this time, the choice of regulation mode has little effect on energy saving, even can not achieve the purpose of energy-saving, but will increase energy consumption because of the existence of regulation devices, such as hydraulic couplers. Moreover, in general, the deeper the adjustment needed, the more obvious energy-saving benefits can be achieved. Therefore, when using the swirl pump, attention should be paid to the reasonable selection of regulation mode to obtain the maximum benefit. Variable speed regulation can achieve excellent energy-saving effect in some cases. Especially in the use of variable frequency motor speed regulation, its energy-saving program is the best, but at this time need to add the corresponding frequency conversion device for the vacuum pump.