Some large enterprise factories or large mechanical equipment, need to use large side channel blower to carry out auxiliary work, which is very desirable.
The large fan has the following characteristics: a variety of uses, can not only inhale but also blow.
Second, very environmentally friendly, in the process of use is almost oil-free operation.
Third, the pressure, the wind.
Fourth, low noise, will not bring trouble to the surrounding residents.
Fifth, high pressure fans are very durable, very easy to maintain, and almost maintenance free.
Sixth, the side channel blower itself in the process of operation of the mechanical wear is very small, the service life of at least three years.
Seventh, the assembly of the high pressure fan is very easy and convenient.
Large high pressure blowers generally have high pressure, large air volume, low noise and light weight compared with other equipment. The clearance between the rotor and the rotor, the rotor and the body is small. It puts a lot of pressure on the wind.
The internal blades are specially designed and developed, with high manufacturability, abrasion resistance, high wind power and long service life. Even in the above 5000 altitude environment normal work, resistant to high temperature, cold.
What are the requirements and needs to be paid attention to in the installation of large high pressure blower?
1. Installation location: it shall be installed indoors where it is not disturbed by wind and rain;
2. Ambient temperature :40℃ relative humidity :80%;
3. Dust protection: there is a large amount of dust, powder or fiber should be avoided in such places, if necessary to use in such occasions, please install a filter, and regularly clean up the dust attached to the filter screen and high pressure blower;
4. Ventilation and heat dissipation: please choose to use in a well-ventilated place, not in a closed room or a closed box;
Do not knock the large side channel blower when transporting it to prevent damage to internal parts.